INTRODUCTION
The device is a waterproof standalone Access Control with integrated Keypad and card reader. It is an easy to install and operate device, designs in less wires for mounting with doorbell, with user-friendly programming. The compact design makes it a good choice for door access.
The device is housed in a strong Zinc-Alloy electroplated case. It supports up to 1000 users in multiple access configurations (Card only, Card or PIN, or Card + PIN). The built-in card reader supports EM 125KHZ frequency cards.
The device with ‘remote control’ function is optional.
(Remote control to open the door remotely)
Features:
- Waterproof, conforms to IP66
- Vandal Resistant Enclosure
- Backlit Keypad
- Multi-colour LED status display
- One programmable Relay Output
- 1000 Users (990 Normal Users + 10 visitor Users)
- Access Mode: Card, PIN, Card+ PIN
- Low power consumption (50mA)
- Anti-Tamper Alarm
- Latch Mode to hold door or gate open
- 12-18V DC Power input
Specifications:
User Capacity Normal Users Visitor Users | 1000 Cards/PINs 990 10 |
Operating Voltage Idle Current Active Current | 12-18VDC 50mA 80m.A |
Keypad | 13 keys |
Proximity Card Reader Radio Technology Read Range | EM 125 KHz Industry Standard Proximity Card 2-5cbgm |
Wiring Connections | Relay Output, Exit button |
Relay Adjustable Relay Output Time Lock Output Load
| One (NO, NC, Common) 0-99 Seconds (5 seconds default) 3 Amp Maximum |
Environment Operating Temperature Operating Humidity | Meets IP66 -400C-600C, -400F~1400F 10%-90% non-condensing |
Physical Surface Finish Dimensions
Unit Weight | Zinc-Alloy Enclosure Powder Coat L116xW76xH26(mm) L4.57 x W2.99 x H 1.02 (inches)
600g / 1.32 lbs.
|